| |
Maquilacero S.A. de C.V. a Steel Service Center located in Monterrey Mexico, has commissioned the construction of a high production Heavy Gauge Cut-to-Length Line to Herr-Voss Stamco
October 10, 2004 — Maquilacero S.A. de C.V. has recently purchased a new Precision Heavy Gauge Cut-to-Length Line from Herr-Voss Stamco. The new line will incorporate the latest technology and proven design durability, providing high production rates and superior part accuracy.
The line will run coils up to 60,000# x 72" wide at a maximum speed of 200 FPM. With a material thickness range of .050" to .500" at 65,000 PSI Yield Strength steel, the line includes one (1) corrective flattener and two (2) Herr-Voss Stamco industry leading Precision Corrective 4-Hi Levelers. Hot rolled steel, cold rolled steel, and some galvanized automotive grade steel will be processed on this system.
The shear includes a motorized knife gap adjustment for quick knife set-up. In addition, the line will be able to stack sheets up to 40' in length. The coil payoff system is designed to handle coils with IDs that range from 20" to 30".
Other features of the line include a four-coil storage system with a scissor type lift coil car and automatic edge guide centering system. This line will be installed and commissioned in the Fall of 2005.
Herr-Voss Stamco is a leading designer and manufacturer of slitting, cut-to-length, tension leveling, precision roller leveling and other coil processing equipment.
Herr-Voss Stamco Supplying New Finishing Lines to Hunan Valin Iron and Steel Group
September 24, 2004 — Hunan Valin Iron and Steel Group to Expand their Rolling Mill and Finishing Facilities in China.
Herr-Voss Stamco, a subsidiary of Genesis Worldwide II Inc. announced that it has received an order for two finishing lines to be installed in Hunan Valin's facility in Hunan Province, P.R. China.
The scope of the project includes complete engineering and design of the mechanical and control equipment, the coordination of joint Engineering and Manufacturing, and assistance of the installation and commissioning.
One finishing line includes a joiner, tension leveling system, sophisticated vertical inspection station, side trimming/splitting system, and a GFG electrostatic oiler. The tension leveling system removes stresses and distortions from bad shape incoming strip, there-by producing dead flat product. The side trimming/splitting system can split the full width incoming strip into two half width strips.
The second finishing line includes a horizontal inspection station with mirror and stoning table, side trimming, and a GFG electrostatic oiler.
Each line can handle incoming material up to 2.5 mm thick in coils 1900 mm in diameter by 1600 mm wide, weighing up to 30 tons, and breaks the incoming large diameter master coils into multiple outgoing coils. The metal ranges from dead soft to full hard steels.
As a recognized world leader in flat rolled coil processing technology, Herr-Voss Stamco designs, manufactures and installs a wide range of coil processing equipment with expertise in Precision Leveling, Slitting, Cut-To-Length, Multi-Blanking and Tension Leveling with headquarters located in Callery, Pennsylvania. The company also offers complete support services, including Field Service and Training, Spare & Repair parts, Rebuilds & Retrofits.
Its sister company GFG, with headquarters in Sussex, Wisconsin, designs and manufactures coil coating and coil processing lines, paint coaters, chemical coaters, waxers, laminators, embossers and electrostatic oilers.
Herr-Voss Stamco Supplying New Tension Level / Inspection / Side Trim Line to Baotou Steel
September 23, 2004 — Inner Mongolia Baotou Steel Union Co., Ltd to Expand their Rolling Mill and Finishing Facilities in China.
Herr-Voss Stamco, a subsidiary of Genesis Worldwide II Inc. announced that it has received an order for a Tension Level/Inspection/Side Trim line to be installed in Baotou's facility in Baotou, P.R. China.
The scope of the project includes complete engineering and design of the mechanical and control equipment, the coordination of joint Engineering and Manufacturing, and assistance of the installation and commissioning.
The line includes a welder, tension leveling system, sophisticated vertical inspection station, side trimming, and a GFG electrostatic oiler. The tension leveling system removes stresses and distortions from bad shape incoming strip, there-by producing dead flat product. The inspection station has mirrors, lighting, and strobe lights. The inspector can inspect both sides of the strip simultaneously.
The line can handle incoming material up to 3.0 mm thick in coils 1900 mm in diameter by 1560 mm wide, weighing up to 28 tons, and breaks the incoming large diameter master coils into multiple outgoing coils. The metal ranges from dead soft to full hard steels.
As a recognized world leader in flat rolled coil processing technology, Herr-Voss Stamco designs, manufactures and installs a wide range of coil processing equipment with expertise in Precision Leveling, Slitting, Cut-To-Length, Multi-Blanking and Tension Leveling with headquarters located in Callery, Pennsylvania. The company also offers complete support services, including Field Service and Training, Spare & Repair parts, Rebuilds & Retrofits.
Its sister company GFG, with headquarters in Sussex, Wisconsin, designs and manufactures coil coating and coil processing lines, paint coaters, chemical coaters, waxers, laminators, embossers and electrostatic oilers.
Genesis Worldwide II, Inc. Signs New Credit Agreement with GE Commercial Finance
September 15, 2004 — Genesis Worldwide II, Inc., Callery, PA, and its subsidiaries Herr-Voss Stamco (Callery, PA), GFG (Sussex, WI), Herr-Voss Stamco Roll Services (Ambridge, PA), and Herr-Voss Stamco RCI (Chesterton, IN) recently signed a $30 million, Senior Secured, 3 year Revolving Credit Facility and Term Loan credit agreement with GE Commercial Finance. The new credit facility also provides for Export-Import Bank of the United States guaranteed working capital and letter of credit sub-facilities. Genesis and its subsidiaries will use the credit facility with GE Commercial Finance to restructure its current debt and to provide for the Company's growth opportunities in the United States, as well as internationally.
Herr-Voss Stamco is a leading designer and manufacturer of slitting, cut-to-length, tension leveling, precision roller leveling and other coil processing equipment for flat metal processors around the world. It also provides a wide range of services to these manufacturers. GFG is a leading designer and manufacturer of metal coil coating and coil processing lines, paint coaters, chemical coaters, waxers, laminators, embossers and electrostatic oilers for customers around the world.
Maryland Metals Positions Itself for the Future with Herr-Voss Stamco's Latest Multi-Blanking Technology
August 23, 2004 — Herr-Voss Stamco is pleased to announce a recent contract award from Maryland Metals, a premier toll processor of aluminum, pre-painted steel and surface critical stainless steel.
The multi-blanking line will be the first with both the CNC Compu-Set® Leveler and the CNC Compu-Cut® Slitter; two innovations that significantly improve the up-time and the quality of both the slitting and leveling processes. The line will run coils from 12" to 60" wide at a maximum speed of 350 FPM with a material thickness range of .018" to .105" and a maximum yield of 60,000 PSI. The line will produce a minimum mult width of 5".
The leveler incorporates a proprietary arrangement for precise adjustment. This feature, plus the fact that the rolls are positioned by a high performance drive with encoder feedback, enables automatic, repeatable calibration.
The slitter is a true computer numeric controlled machine. The operator simply enters the desired parameters, including clearances, and the machine sets itself; accurately and quickly. Setups are complete before the next coil is threaded.
The High Speed Shear with the remotely adjustable knife clearance provides burr-free sheets. Vinyl and paper handling equipment along with the Air Float Mult Stacker ensure the sensitive product is stacked evenly and quickly without the risk of damage.
Ken McAvoy, president of Maryland Metals, stated: "Time is money if you're a processor; you need to be running 40 out of 40 hours. You need to cut down your labor costs, and you need to improve your quality. We say we are world-class, and we put our money back into buying world-class equipment. We can't compete on a labor basis with Mexico and China. So we have to make sure that we can produce coils into blanks with the best quality."
The line is scheduled for operation in the summer of 2005.
Herr-Voss Stamco is a leading manufacturer of slitting, cut-to-length, tension leveling, precision roller leveling and other coil processing equipment.
Herr-Voss Stamco Supplying Multi-Blanking Line to Large South American Service Center
August 12, 2004 — Large South American Service Center Purchases Herr-Voss Stamco Multi-Blanking Line
A large South American service center has recently purchased a new Precision Multi-Blanking Line from Herr-Voss Stamco. The new line will incorporate the latest technology and proven design durability, providing high production rates and superior part accuracy.
The line will run coils up to 25 Metric Tons x 1550 mm wide x 4500 mm maximum length at a maximum speed of 70 MPM. With a material thickness range of 0.300 mm to 1.900 mm in high yield steel, the line includes Herr-Voss Stamco's industry leading Precision Corrective Leveler. Cold rolled steel as well as painted appliance grade steel will be processed on this surface critical system.
The slitting will be handled by a double head slitter unit. This unit will permit slitter heads to be changed in less than two minutes making up to 3 mults. This unit will produce slit width accuracy of 0.125 mm. The length accuracy is ± .380 mm repeatability, which will be held on cut lengths.
This line also incorporates an Ethernet network that will allow the system to communicate through a single cable, simplifying the installation process.
Other features of the line include a Precision Roll Feed System, high speed down-cut Shear, a Reject and Inspection Area and an Air Flotation Stacking System. This line will be installed and commissioned in the Spring of 2005.
Herr-Voss Stamco is a leading manufacturer of slitting, cut-to-length, tension leveling, precision roller leveling and other coil processing equipment. It is a part of Genesis Worldwide II, Inc.
Herr-Voss Stamco Supplying Two New Finishing Lines and a Coil Transfer System to Benxi Iron & Steel Group
May 19, 2004 — Benxi Iron and Steel Group to Expand their Rolling Mill and Finishing Facilities in China. Herr-Voss Stamco Supplying New Finishing Lines and Coil Transfer System.
Herr-Voss Stamco, a subsidiary of Genesis Worldwide II Inc. announced that it has received an order for two finishing lines and a plant-wide coil transfer system to be installed in Benxi's facility in Liaoning Province, P.R. China.
The scope of the project includes complete engineering and design of the mechanical and control equipment, the coordination of joint Engineering and Manufacturing, and assistance of the installation and commissioning.
One finishing line includes a welder, sophisticated vertical inspection station, side trimming, and a GFG electrostatic oiler. The inspection station has mirrors, lighting, and strobe lights. The inspector can inspect both sides of the strip simultaneously.
The line can handle incoming material up to 2.5 mm thick in coils 2150 mm in diameter by 1870 mm wide, weighing up to 31 tons, and breaks the incoming large diameter master coils into multiple outgoing coils. The metal ranges from dead soft to full hard steels.
The second finishing line includes all of the same features as the first line, plus a tension leveling system to remove stresses and distortions from bad shape incoming strip, there-by producing dead flat product.
As a recognized world leader in flat rolled coil processing technology, Herr-Voss Stamco designs, manufactures and installs a wide range of coil processing equipment with expertise in Precision Leveling, Slitting, Cut-To-Length, Multi-Blanking and Tension Leveling with headquarters located in Callery, Pennsylvania. The company also offers complete support services, including Field Service and Training, Spare & Repair parts, Rebuilds & Retrofits.
Its sister company GFG, with headquarters in Sussex, Wisconsin, designs and manufactures coil coating and coil processing lines, paint coaters, chemical coaters, waxers, laminators, embossers and electrostatic oilers.
Jinan Iron and Steel Group to Expand their Rolling Mill and Finishing Facilities in China. Herr-Voss Stamco Supplying New Finishing Line.
May 06, 2004 — Herr-Voss Stamco, a subsidiary of Genesis Worldwide II Inc. announced that it has received an order for a new Inspection, Side Trim and Recoil Line to be installed in Jinan's facility in Shandong Province, P.R. China.
The scope of the project includes complete engineering and design of the mechanical and electrical control equipment, the coordination of joint Engineering and Manufacturing, and assistance with the installation and commissioning.
The Inspection, Side Trim and Recoil Line includes an inspection station, side trimming, and an electrostatic oiler. The inspection station has mirrors, lighting, stoning table, and strobe lights. The inspector can inspect both sides of the strip simultaneously.
The line can handle incoming material up to 2.5 mm thick in coils 2200 mm in diameter by 1650 mm wide, weighing up to 35 tons, and breaks the incoming large diameter master coils into multiple outgoing coils.
As a recognized world leader in flat rolled coil processing technology, Herr-Voss Stamco designs, manufactures and installs a wide range of coil processing equipment with expertise in Precision Leveling, Slitting, Cut-To-Length, Multi-Blanking and Tension Leveling with headquarters located in Callery, Pennsylvania. The company also offers complete support services, including Field Service and Training, Spare & Repair parts, Rebuilds & Retrofits.
Its sister company GFG, with headquarters in Sussex, Wisconsin, designs and manufactures coil coating and coil processing lines, paint coaters, chemical coaters, waxers, laminators, embossers and electrostatic oilers.
Large U.S. Service Center Purchases Herr-Voss Stamco Multi-Blanking Line
March 24, 2004 — A large U.S. service center has recently purchased a new Precision Multi-Blanking Line from Herr-Voss Stamco. The new line will incorporate the latest technology and proven design durability, providing high production rates and superior part accuracy.
The line will run coils up to 60,000# x 72" wide at a maximum speed of 300 FPM. With a material thickness range of .014" to .135" mild steel, the line includes two (2) Precision Corrective 5-Hi Levelers. Cold rolled steel as well as painted appliance grade steel will be processed on this surface critical system.
The slitting will be handled by the newly developed Compu-Cut Slitter®. This unit provides programmable knife positioning of up to 5 mults in approximately 3 minutes. All slitter adjustments are done automatically. There are no "hands on" adjustments on the slitter itself. This unit will produce slit width accuracy of .005". The length accuracy is + .005" repeatability, which will be held on cut lengths.
Other features of the line include a Precision Roll Feed System, variable Speed AC Overdriven Shear, a Reject and Inspection Area and an Air Flotation Stacking System. This line will be installed and commissioned in the Fall of 2004.
Herr-Voss Stamco is a leading manufacturer of slitting, cut-to-length, tension leveling, precision roller leveling and other coil processing equipment. It is a part of Genesis Worldwide II, Inc.
Harbor Steel Processing Purchases Herr-Voss Stamco Loop Type Slitting Line
March 17, 2004 — Herr-Voss Stamco announced that it has signed a contract with Harbor Steel Processing for a new Slitting Line. Harbor Steel is a toll processor with a 240,000 sq. ft. facility in Burns Harbor, IN. This new line will process both high-strength and mild carbon steel for the automotive and lawn and garden industries. The line will receive coils .015" to .250" thick x 74" wide x 80" O.D. with weights of 70,000 pounds and will slit them at a speed of 1,000 FPM.
Harbor's new line will be arranged in an elevated passline configuration, and will include two high-precision Double Eccentric Slitter Heads, with a rotary Set-Up Stand. Herr-Voss Stamco's advanced Slitting Lines produce the most consistent, high quality, slit coils available.
David Bazzy, President of Kenwal Steel, stated, "The decision to go to Herr-Voss Stamco was made based on the quality and reputation of their products. We feel with the addition of this line, we can further satisfy our customers' stringent quality requirements for slit coil product."
Herr-Voss Stamco is a leading manufacturer of slitting, cut-to-length, tension leveling, precision roller leveling and other coil processing equipment.
|
|
